The Lightweight Tactical Grip (LTG) is specifically engineered to cut weight, improve grip and add a level of aggressive styling – at a value price. Utilizing high grade reinforced polymer materials, the LTG offers all weather performance, durable lightweight construction and ergonomic comfort for consistently accurate firearm control.
-
Best SellerThe ATI AR-15 / AR-10 X2 AR-15 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift.
-
The Apex Optimized Grip for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine and optimized grip angle improves overall ergonomics when compared to the factory grip. It is designed so the trigger assembly can be removed without removing the grip.
-
The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.
-
The AG-43 State-of-the Art Pistol Grip enhances grip control, reduces slipping and wrist fatigue, and improves overall control during firing sequences.
-
The new Shift™ short angled grip integrates form with functionality. The Shift™ short is a hybrid of sorts. The shape works as a comfortable hand stop when going with the thumb over method. The grip allows you to handle the weapon with the confidence and the organic design enables the operator to manipulate the rifle in ways that’s not quite possible with other vertical grip designs. Look for our distinctive grip design and you'll see the difference.
-
Hexmag Grip Tape provides the ultimate grip for your Hexmag magazines and the Hexmag Advanced Tactical Grip. Customize your gripping power where you need it!
-
Best SellerThe best gun grips create a secure yet comfortable grip. Look no further than the Hexmag Tactical Grip (HTG), which delivers an over-molded rubber grip with the iconic HEXTURE™ design pattern for increased grip combined with ergonomically correct finger grooves. The perfect grip for increased performance when it counts.
-
Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel, without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene, which results in a superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that outperform all other makes. Options available: with or without finger grooves.
-
Best SellerIndian Creek 1911 Grip Adapter for AR-15 allows users to get the feel of 1911's without the required left hand trimming.
-
The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. Made in U.S.A.
-
The Magpul MOE-EVO CZ Scorpion Grip is the perfect replacement for your factory CZ Scorpion grip. With an enhanced grip angle for better ergonomics, and solid construction from Magpul that you can trust in the harshest conditions, this is you new grip!
-
Best SellerThe Nightstrike Diamondback foregrip is an aggressively angled hand rest designed to improve the ergonomics of your AR. Able to be held in several ways, this grip increases the overall comfort of your rifle, carbine or pistol. Made in the USA.
-
The Phase 5 Micro Stop – KeyMod and M-Lok are ultra-lightweight rail attachments that will assist the operator with indexing their support hand while deploying the weapon; as well as keeping the support hand in the same position while firing. The Micro Stop can be mounted on the bottom or either side of either a KeyMod or M-Lok compatible rail system in a forward or reverse direction, allowing either a push or pull style grip by simply reversing the KeyMod nut for KeyMod rails or reversing the whole unit for M-Lok systems.
-
These beautiful Brazilian cherry wood AR grips and panels by Sharps Bros. were inspired by IWI Galil. They add a classic look to modern AR builds and provide a unique appearance.
-
Introducing Tyrant Designs AR-15 vertical foregrip, the HALO MiniVert Grip. A perfect combination of aesthetics and functionality, the new AR-15 foregrip is best for those who are searching for the added control and stability of a forward assisting vertical grip without the bulkiness and added weight that you get from other vertical grips. Its slight angle offers great ergonomics and allows the shooter to operate with comfort and confidence. The lower lip extension takes ergonomics to the next level, allowing the shooter to either hold the vertical foregrip traditionally or by tucking the pinky behind for a very comfortable grip. The aggressive side knurl on the lower portions of the VFG allow for ample yaw control when manipulating the firearm. Best of all is its overall small dimension will help make your AR-15 rifle more compact, less susceptible to snagging and keep that all important weight down on a lightweight build! Add it to any M-LOK or KeyMod rail using its direct compatibility with both systems.
-
Introducing the Tyrant Designs HALO Series AR HandStop. It is the first and only direct MLOK and KeyMod compatible AR HandStop. Tyrant Designs utilized their MLOK/KeyMod technology seen on all of their foregrips to allow the operator the ability to use the HandStop on both platforms for a true two in one product. Tyrant's AR HandStop grip has been designed and tested for a lightweight and multifaceted usability. It is extremely comfortable and can be used to improve your target acquisition. Use it as a forward stop to help keep your hand away from hot muzzle devices. It also doubles as a great barricade stop. Best of all its overall small dimension will help make your AR-15 rifle more compact, less susceptible to snagging and keep that all important weight down on a lightweight build!
-
Introducing Tyrant Designs' lightest AR Grip to date, the LWP (Lightweight Pro) Grip! A drop in replacement for the AR platform, the Lightweight Pro tips the scales at 3.4 ounces and is lighter than 95% of any other grip. Ever. Period. (Yes we mean polymers too) ! We set out to create the lightest, most ergonomic grip on the market without compromising the structural integrity and quality. It is CNC machined from a single piece of aerospace grade aluminum and has a knurled back strap for additional adhesion. It instantly gives the operator the confidence needed in any weather or scenario, all while maintaining the consistency needed for a light weight build. It gets bead blasted then finished in a type III hard coat black anodize. Despite its lightweight it is incredibly durable and does not feel flimsy in the hand. If you are looking for the perfect grip for your lightweight build, look no further than the LWP!
-
Tyrant Designs brings you the MOD Series ForeGrip. Truly the best of both worlds. The hybrid design allows the operator to use on both popular M-LOK as well as KeyMod designs without having to change the grip. The AR-15 ForeGrip enables you to operate your AR with confidence and precision in a way that other grips do not, all while giving you the versatility to switch from one type of rail to the next with ease. In addition, the aluminum body with polymer strap gives the operator the unique style of our product with the feel of a classic polymer grip. Operate your rifle on a new level with our new MOD ForeGrip!
-
Best SellerThe MOD Grip is truly the first of its kind. A drop-in grip replacement for the AR platform, it has been extensively tested and designed by Tyrant Designs CNC. It is a very lightweight and modular (hence the name) Aluminum and Polymer Composite AR-15 grip. The body of the grip is made from aerospace grade 7075 Aluminum, then finished in a type III hard coat black, red, grey or blue anodize. The front and back straps of the grip are made from a polymer composite, are fully removable, and are offered in different sizes as well as designs. We will continue to come out with new strap options as well as strap designs, making this one of the most modular AR-10/15 grips available. With this design the operator will not have to compromise form vs. function. Tyrant Designs has specifically designed this grip to feel just as comfortable as any other polymer grip, but with the American craftsmanship every rifle deserves.
-
The ultimate AR-15 Pistol Grip is here. The MOD v2 is the latest version of Tyrant Design's best selling skeletonized AR Grip. The MOD v2 is machined from aluminum and merged with a soft durometer rubber front & back strap. It has a reduced angle and ergonomics far superior to any other AR-15 Grip! There is no compromise when it comes to the MOD v2 aluminum pistol grip. It has the beautiful craftsmanship of a machined aluminum grip, with the ergonomics of a sturdy rubber grip. With its 15 degree reduced angle you can operate your AR all day with no concerns for fatigue. Tyrant Designs machines each AR Grip from aluminum in order to keep the grip as light as possible.l. What is left is a high end finished aluminum AR grip that gives your rifle the high-end look it deserves.
-
The Titan 2.0 is an upgraded version of one of the finest weapons design by Tyrant Designs CNC. It is a drop-in replacement grip for the AR platform. CNC machined from a single piece of Billet Aluminum and available in hard coat type III anodized black it has endured 100's of hours of R&D. A simple screw in installation, it's time that your rifle looks as good as it shoots!