The AD-BP Bipod Mount enables you to attach a Harris bipod to your railed forearm. Not compatible with the Tac Lever ( Lever interferes with the bipod itself ). It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The AD-BP bipod mount features the Patented QD Auto Lock™ Lever system which has the following advantages:
The AD-BP bipod mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
The AD-BP bipod mount has the following specifications:
Reliable back-up iron sights that mount perfectly on the AR-10(T) and AR-10 A4 models. Featuring Armalite’s recoil-stopping cross-lug to prevent receiver damage due to lock-screw movement. With field sights, .70/.195 aperture.
Rear Sight: 1″ Elevation and 1/2″ Windage
The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature red dot optics in the 1 O’clock (right-hand) or 11 O’clock (left-hand) positions for quick, non-magnified, transitions when employing magnified primary optics on AR-type rifles with MIL-STD-1913 rails. The geometry allows for zero cheek-weld shift during the transition. This facilitates very fast transitions from magnified to non-magnified optics, and back. The 1 O’clock Offset Rail can also be used to mount a variety of lights or other accessories that mount to a MIL-STD-1913 rail. By flipping the part upside-down, one can mount a light in a good position for use with a vertical foregrip.
Updated for 2014, the 1 O’Clock Offset Rail now utilizes our patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.
All Daniel Defense Rails are built to the 1913 Military Specification and are 100% Quality Assurance checked for conformity to the specification.
The Daniel Defense Rail Mount QD Swivel Attachment Point is designed to allow the operator to mount the popular Heavy Duty Push Button Quick Detach Sling Swivel. This mount allows the operator to mount the swivel anywhere along their rail system. The Daniel Defense Rail Mount QD Swivel Attachment Point has been designed to limit the rotation of the swivel to prevent the operators sling from becoming tangled.
The Rail Mount QD Swivel Attachment utilizes our patented “Rock and Lock” one piece mounting system for a more robust and streamlined attachment point as well as simplified installation on any MIL-STD-1913 picatinny rail. This mount includes a Heavy Duty Push Button Quick Detach (QD) Sling Swivel which accepts sling straps up to 1.25".
The GG&G Harris Bipod Adapter attaches easily to Weaver or MIL-STD-1913 dovetails. Features of the GG&G Bipod Adapter include a stationary standard swivel stud, a counter sunk locking cross bolt that helps eliminate the possibility of snags, a clamping side bar that is recessed into the overall body of the adapter to provide a smooth overall appearance, and solid clamping engagement, even on undersized or worn dovetails. Most importantly, the GG&G Harris Bipod Adapter makes full surface contact with the Harris bipod interface which assures a tight fit.
Manufacturer Part Number: GGG-1388No Additional Information Provided
Designed to provide a rugged, low-profile, ultra lightweight and ergonomic attachment point for your bipod
Accepts any bipod which attaches to a standard sling swivel stud
Directly attaches to any slot on M-LOK Compliant Rails and ALL Magpul MOE Handguards including MOE AR15/M4/M16/SR25/M110 Original & M-LOK, MOE SL M-LOK, MOE AK/AKM M-LOK, MOE Remington 870 Original & M-LOK and MOE Mossberg 590/590A1 Original & M-LOK
Designed with IWC's proprietary KML Reversible Mounting Nut, which engages the inside of the Original width slot or simply reverse the nut to the M-LOK compatible design and attach to M-LOK compliant slots
No gunsmithing, spacers or washers are required for install
Ergonomic, direct attach design eliminates all sharp edges which can ensnarl the operator’s gear
Ultra-light MOUNT-N-SLOT design weighs only 6.775 grams (.239 ounces)
CNC machined from billet 6061-T6 aluminum;Type III Anodized per MIL-A-8625F
100% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges
IWC’s MOUNT-N-SLOT products are MADE IN AMERICA
LCH 2" Accessory Rail.
The accessory rails are precision-machined aluminum "Picatinny" design.
The 2" accessory rails differ for the sight rail, being slightly thicker and designed to be used with the provided backer plates and fasteners.
The backer plates are designed to lock into the cooling slots, providing positive retention during rough handling.
Weight - .7oz
XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package.
Made in U.S.A.
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.
Made in U.S.A.
Manufacturer Part Number: MAG510-BLK;MAG510-FDE; MAG510-GRY; MAG510-ODG; MAG510-PNKNo Additional Information Provided
The Midwest Industries Bipod Adapter is made to work with Harris type bipods.
(1) Long Panel, covers 7 KeyMod slots
(4) Short Panel, covers 1 KeyMod slot each
(1) Short Locking Panel, covers 1 KeyMod slot
(1) Rear Handstop, covers 2 KeyMod slots
(1) Front Handstop, covers 1+ KeyMod slots, extends flush to the front of the Handguard
Available in BLACK & FLAT DARK EARTHView full product details
Manufacturer Part Number: MHS-MLOK-BLK, MHS-MLOK-GREY, MHS-MLOK-RED
No Additional Information Provided
Field adaptable and easy to install, Seekins aluminum M-LOK Rails are the best way to mount accessories on any M-LOK system hand guard.