-
What was once a red-hot round fired by our U.S. military can now be used to crack open your ice cold beverage of choice. Handmade from genuine brass casings procured directly from the Department of Defense. Guaranteed to bring plenty of good ol' U.S. history along with it! The perfect gift for any beer lover.
-
These 12 gauge shot gun shell magnets make any to do list stand out, never miss a note again! (Made from genuine fired shell casings and may contain minor blemishes or scratches consistent with their history.)
-
Made from a genuine once-fired, America made 40 caliber shell casing. Set includes 4 valve stem caps.
-
Bullets don’t always mean beer. With our Bullet Corkscrew, you can bring our classic genuine brass .50 caliber casing to your favorite bottle of chardonnay (pinky out is optional). The end of the bullet unscrews to reveal the corkscrew. Simply slide the bullet through the hole and you have the perfect amount of leverage to open any bottle.
-
These Noise Reducing Earplugs are made from genuine 9mm bullet casings and come with a convenient carrying case to keep your earplugs safe and dust free. These earplugs have an impressive noise reduction rate of 27dB making them your go-to ear protection, and the perfect earplugs to use while shooting at the gun range.
-
The Builder Series will offer a vast number of 2A Armament components that have been made with the AR builder in mind. Not only does the Builder Series offer extremely high quality products, but it also offers very competitive pricing.
-
Everything you will need to repair or replace the essential components on your 2A Armament or other Mil Spec AR15 bolt.
-
The Palouse-Lite Forged Upper Receiver that is part of the 2A Armament Builder Series. The Builder Series will offer a vast number of 2A Armament components that have been made with the AR builder in mind.
-
The 2A Armament™ Xanthos rails continue the tradition of an extremely lightweight, rugged, and quality rail to complement the 2A Armament Xanthos-lite receiver set and the .308 handguard market. Two different styling choices are available, a traditional Balios inspired design (XRVC-15), and a more progressive slant cut design (XRSC-15). The aluminum barrel nut, with 2A's innovative 45 degree set screw mounting system provides an easy to install, solid joint to the upper receiver with no protruding fasteners or sharp edges.
-
The Accu-Tac FC-G2 F-Class Bipod with the quick detach was designed, engineered, and manufactured in the USA. This bipod is perfect for long range, target, competition, and tactical shooting. The FC-5 QD is 100% billet, made from the highest quality aircraft aluminum available.
-
The Accu-Tac steel spikes are the perfect accessory for your bipod. They provide aggressive traction on dirt or any soft surfaces. They are CNC machined and black oxide treated. The replacement spikes have a simple screw on design for the SR-5 Bipod that allows you to quickly change from rubber feet to steel spikes in seconds!
-
The Lightweight Tactical Grip (LTG) is specifically engineered to cut weight, improve grip and add a level of aggressive styling – at a value price. Utilizing high grade reinforced polymer materials, the LTG offers all weather performance, durable lightweight construction and ergonomic comfort for consistently accurate firearm control.
-
Best SellerThe ATI AR-15 / AR-10 X2 AR-15 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift.
-
The AR15 Assembled Upper Receiver comes with the port door and forward assist already installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil- spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit.
-
The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.
-
The Engage Tactical Rifle Case by Allen features thick foam padding, rugged Endura fabric construction, and an easy clean polyester lining. The case also has three magazine pockets, durable web handles, and a D-ring for locking your zippers. Available in two different models for guns up to 38" and 42".
-
Best SellerThe Amend2 10 round magazine is a sturdy, reliable 5.56x45 NATO (.223 Remington) AR15/M4/M16 magazine made of advance polymer material. It is a light, durable and excellent alternative to the standard M4/M16 USGI aluminum magazine. The 10 round body profile is ideal for hunting, bench shooting or the various states where capacities are limited by law. The magazine comes in a variety of colors including Black, Flat Dark Earth, OD Green and Gray.
-
The AD-RECON-M mount with Titanium Levers is made for putting high power glass onto a flattop style AR-15. Designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the mid-height mount that we offer, the centerline height with 30mm rings is 1.64" and 1.7" with 34mm rings. The cantilever throws the scope out front with 2″ offset, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented Titanium QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
-
The AD-RECON-H mount is made for putting high power glass onto a flattop style AR-15. Designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the tallest mount that we offer. The cantilever throws the scope out front with 2″ offset, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
-
The AD-MRO mount is designed for the Trijicon Miniature Rifle Optic that places in either a co-witness or lower-third co-witness height. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in-spec and out-of-spec rail systems.
-
9mm 3-lug muzzle brake allows for quick attachment of sound suppressors without sacrificing flash mitigation and recoil management when shooting un-suppressed.
-
9mm bolt carrier group compatible for use with both GLOCK® and Colt® style 9mm AR-15 magazines without any further modifications.
-
The Apex Safety Lever Set for the CZ Scorpion EVO 3 S1 adds additional width over the standard factory safety, allowing for more positive leverage during engagement or disengagement.
-
The Apex Low Profile Safety Lever Set for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine, and is compatible with the CZ folding stock.
-
The Apex Optimized Grip for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine and optimized grip angle improves overall ergonomics when compared to the factory grip. It is designed so the trigger assembly can be removed without removing the grip.
-
The Armaspec AR Spare Parts Kit contains common AR parts like springs and detents that are frequently lost or needed replacement.