As the AR Platform has changed to accommodate new calibers and operating systems, so must the Trigger advance accordingly. Enter the KE Arms SLT-1 Trigger, with the advanced and innovative features needed to give you the edge.
There is no disconnector for the hammer to drive through, thus creating a more efficient cycle of the bolt simply pushing the hammer out of the way as the gun fires. Forces of the bolt on the hammer are not transmitted into any other components of the trigger assembly. The Constant sear engagement against the hammer means the trigger is always ready to reset and fire.
Due to the unique geometry of the trigger, the safety can always be applied regardless of the hammer being down or cocked. When used appropriately this adds another level of safety to administrative handling and clearing of malfunctions.
Moving parts are sealed in the underside of the housing making it less susceptible to fouling and debris.
No impact on moving internal parts increases longevity of the trigger system.
The SLT-1 has been tested thoroughly with traditional AR calibers and pistol caliber blow back systems. It has also been tested in the Sig Sauer MPX with no damage.*
- 4.5 Pound Single Stage Trigger Pull
- Minimal Takeup and Overtravel
- Ultra-crisp break
- Drastically reduced Split Times
- Simple Drop-In Installation.
- Efficient Energy Transfer
The SLT-1 Drops into mil-spec fire control pockets and is retained with standard fire control pins captured by springs inside the housing bushings.
*While KE Arms has successfully tested the SLT-1 with Tula and Wolf ammunition in .223, .308, and 9mm, we have NOT tested it with 7.62x39mm com bloc surplus with hard primers.
Manufacturer Part Number: 1-50-11-001No Additional Information Provided
If you are building a new AR-22LR from the ground up or want to permanently convert your existing AR-15, the 2a Armament 22LR Bolt Carrier & Barrel Kit is the perfect choice for a lightweight build.
Manufacturer Part Number: 2A-22BCGBAR-1No Additional Information Provided
Designed under the highest quality standards and with extreme reliability in mind, the 2A Armament AR 22LR Conversion Bolt Carrier allows you to quickly and easily convert your .223/5.56 AR-15 into a 22LR rifle. Ideal for small game and low cost target shooting, the AR 22LR Conversion Bolt Carrier weighs in at just 8.2 ounces.
Bolt Carrier Features:
Manufacturer Part Number: 2A-22CONBCG-1
The 2a Armament AR 22LR Magazines are designed for extreme reliability when paired with the 2A Armament AR 22LR Conversion Bolt Carrier.
Manufacturer Part Number: 2A-22LRM10S-1; 2A-22LRM15S-1; 2A-22LRM25S-1
The 2A Armament™ AR-15 Steel takedown pin set features the same classic through drilled design as our popular Titanium takedown pins but with a black oxide finish to accommodate for personal preference. These pins are made from U.S.A. sourced 4140 steel and weigh in at 0.38 oz total for both pins combined. The 2A Armament takedown pins are aesthetically pleasing on both our BALIOS and BALIOS-LITE line of receiver sets, as well as other vendors product.
Enhance your inbox!
Sign up for our newsletter and receive exclusive discounts, exciting new product information, useful pro tips and more! We NEVER share your information.