$ 154.99 $ 179.99
The ODIN Works Ragna handguard is lightweight, strong, and has a uniquely sleek look and smooth-to-the-touch finish. Don’t worry about shims or timing, the Ragna free float handguard has a one-piece barrel nut for a fast and easy install.
Manufacturer Part Number: F-17-ML-RA
Inside Diameter: 1.35"
Outside Diameter: 2.02" Tall by 1.52"
The Phase 5 Sloped Quick Disconnect End Plate (SQD-EP) was designed to replace the standard AR15/M4 carbine end plate. While still meeting the requirements of the original design, the SQD-EP is lighter and QD Swivel compatible.
Compatible with mil-spec carbine receiver extensions, commercial-spec receiver extensions, and all Phase 5 Pistol Buffer Tubes on nearly all AR15/M4/.308 AR Variant lower receivers. Lightweight and sturdy 7075-T6 billet aluminum construction is about 80% stronger than 6061-T6 aluminum.
Uses a standard AR15/M4 carbine Lower receiver extension castle nut (not included).
Accepts all push button QD swivels and QD slings.
QD mount is at a 30 Degree angle from the lower receiver to allow a 360 Degree rotation for ambidextrous use.
Lighter than the standard stamped steel receiver extension end plate (0.39 oz. vs 0.48 oz.)
AR-15 gas tube Stainless Steel Includes (1) gas tube and (1) stainless steel roll pin.View full product details
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and AR10 lower receivers. Easy install that takes minutes.
-Compatible with BAD Lever. Will not work with anti-walk pins unless you modify the XMR2.
-Weight is just .1 oz (including paddle, button, and screws)
-Large surface area for quick magazine reloads.
-Easy to reach.
-Release magazine without changing grip or position.
-Contoured for positive depression and reduced slip.
Manufacturer Part Number: AAC-XMR3No Additional Information Provided
The FATman Hex Brake was created to solve issues faced by many competition shooters and precision rifle builders.
The 2 large (FAT) ventilated baffle sections and chambers create the compensation needed to reduce the overall recoil felt by the shooter.
The FATman Hex Brake includes two top ports machined at a 20 Deg. forward directed angle. These top ports help direct the energy of the spent gas in a manner that maintains a flat consecutive result shot after shot.
The design of the FATman Hex Brake allows the first chamber wall to sit as close to the barrel crown plane as possible. This design element was included to maintain the full accuracy of the barrel.
The iconic Phase 5 Hex design gives the FATman Hex Brake the perfect styling that custom gun builders are looking for.
- Caliber Options: 5.56/.223; 9mm/7.62x39/6.8mm; or 7.62x51/.308/300Blk
- Mil-Spec Black Parkerized Finish.
- Includes (1) Crush Washer
- See Specs Tab for more information.
- See Media Tab for review video.
Manufacturer Part Number: FATman-556; FATman-5/8-24; FATman-9mm
|5.56/.223||3"||1.26"||6.1oz||1/2 x 28 TPI|
|9mm/7.62x39/6.8mm||3"||1.26"||6oz||1/2 x 36 TPI|
|7.62x51/.308/300Blk||3"||1.26"||5.9oz||5/8 - 24 TPI|
Enhance your inbox!
Sign up for our newsletter and receive exclusive discounts, exciting new product information, useful pro tips and more! We NEVER share your information.